Choosing Fire Alarm Inspection Software: A Contractor's Checklist
A buyer's checklist for fire alarm inspection software from a NICET Level IV contractor: offline work, point report import, deficiencies and published pricing.
Blog
Expert tips, industry updates, and best practices to help you maintain safety and compliance year-round.
Fire Alarm Battery Calculations: 24 Hours, 5 Minutes and the Safety Margin
How to do a fire alarm battery calculation per NFPA 72: 24 hours standby, 5 minutes alarm, the 20% vs 25% safety margin and a worked example in mA and Ah.
Fire Alarm Deficiencies: Documenting Them Right and Closing Them Out
How to write fire alarm deficiencies the AHJ and owner can act on, handle impairments, track every deficiency from found to closed out, and record the re-test.
What Belongs in a Fire Alarm Inspection Report (and What Doesn't)
A NICET Level IV checklist for the fire alarm inspection report: what every inspection form should include, and the filler that makes reports hard to read.
Fire Alarm Design in AutoCAD and AutoCAD LT: What a Clean Workflow Looks Like
Fire alarm design in AutoCAD and AutoCAD LT: what a submittal set needs, where drafting time goes, and how templates, layers and keynotes keep it clean.
NAC Voltage Drop: There Is No 10% Rule in NFPA 72
NAC voltage drop calculation explained: why there is no 10% rule in NFPA 72, why you start at 20.4 V, NEC Table 8 wire resistance and a worked example.
NFPA 72 Smoke Detector Spacing: A Designer's Field Guide
NFPA 72 smoke detector spacing explained by a NICET Level IV designer: the 30 ft rule, the 0.7 rule, beams, joists, corridors, sloped and high ceilings.
NFPA 72 Record of Completion: What It Is and How to Fill It Out
What the NFPA 72 Record of Completion is, when it's required, who signs it, what goes in each section, and the mistakes that get it kicked back by the AHJ.
Commercial Fire Alarm Systems in CT: A Buyer's Guide for Property Managers
Choosing a commercial fire alarm system in Connecticut? This guide covers system types, NFPA 72 requirements, what to ask your contractor, and how to evaluate proposals.
Fire Alarm Testing Requirements in Connecticut: A Complete Guide
Connecticut commercial buildings must meet NFPA 72 fire alarm testing requirements. Learn the frequencies, what gets tested, and how to stay AHJ-compliant year-round.
NFPA 72 Fire Alarm Inspection Requirements for CT Property Managers
NFPA 72 sets minimum inspection frequencies for commercial fire alarm systems in Connecticut. This guide covers what gets tested, how often, and what your AHJ expects at every inspection.
NICET Level IV Fire Alarm Design: What It Means for Your CT Building
NICET Level IV is the highest fire alarm design certification available. Learn what it means for CT property managers, why it matters for AHJ approvals, and how Titan's design process works.
The Role of Electrical Safety in Fire Prevention
Electrical failures cause more Connecticut commercial building fires than any other source. What property owners and facilities managers need to know about prevention.
How to Prepare for Your Annual Fire Inspection
Connecticut commercial property checklist: what fire marshals look for during annual fire inspections and how to prepare so your building passes the first time.
Smoke Alarm vs. Smoke Detector – What’s the Difference?
Smoke alarms and smoke detectors are not the same — and Connecticut commercial buildings require the right system for their occupancy type. Here's the distinction.
Why Partnering With a Full-Service Fire Protection Company Saves Time and Money
Connecticut property managers: keep fire alarm drawings, testing, inspection, and service with one NICET Level IV contractor. Less scheduling, less liability.
Fire Safety Planning for Renovations and Tenant Fit-Outs in Connecticut
Connecticut GCs and property managers: avoid failed CO inspections and costly rework. Here's how to keep your fire protection compliant through every phase of renovation.
How to Read and Understand Your Fire Safety Inspection Report
Your Connecticut fire inspection report lists deficiencies that require action — how to read each section, prioritize repairs, and avoid costly re-inspection fees.
Fire Protection Design for CT New Construction | NICET Level IV Guide for GCs
Connecticut general contractors: integrate NFPA 72-compliant fire alarm design from day one. NICET Level IV guidance on AHJ submittals, coordination, and code compliance for CT new construction projects.
The True Cost of Fire Code Non-Compliance
Failed fire inspections cost Connecticut businesses far more than a re-inspection fee. Understand the real financial and legal exposure — and how to stay ahead of it.
Seasonal Fire Safety – Tips for Winter Heating and Holiday Decorations
Connecticut property managers: winter fire risk checklist covering heating equipment, holiday decorations, and what your fire protection systems need heading into the cold season.
How Technology Is Changing Fire Protection
Modern fire alarm systems offer smart detection, remote monitoring, and integrated building safety. How Connecticut businesses can benefit from today's technology.
Outdated Fire Alarm Systems: Hidden Risks CT Property Managers Can't Ignore
“If your Connecticut facility’s fire alarm panel or devices are more than 10 years old, they may fail code — or fail entirely. How to identify the risk and what to do about it.”
How Often Should Fire Alarms Be Tested?
NFPA 72 requires quarterly, semi-annual, and annual fire alarm testing for Connecticut commercial buildings. What each interval requires — and the cost of skipping it.
Understanding NFPA Standards – A Guide for Business Owners
NFPA 72, NFPA 101, NFPA 70 — a plain-English breakdown for Connecticut business owners on what each standard requires and when you need to comply.