Only asks what the building has
Questions follow the system you set up. No pages of N/A on every visit.
Inspection, testing and maintenance software
Fire inspection software, built by a fire alarm contractor.
CodeGreen ITM started right here at Titan. Joe Montuori wrote the inspection software he wanted for his own shop, and the report is done before you're back in the truck. Twenty-one inspection programs, one app, one price.
60-day free evaluation, no credit card. Available to contractors across the United States.
Why a fire alarm contractor built software
It started with Titan's own inspections.
Titan is a working fire alarm company. Every week there are panels to test, devices to walk, deficiencies to write up and reports to get to the fire marshal. The large platforms on the market are built for large companies: seat minimums, sales calls before you can see a screen, and inspection forms full of questions that don't apply to the building in front of you.
So Joe wrote his own. He laid out every question the way a technician talks, and Sam Zimmerman, a senior software developer, built it into an app that holds up in a basement with no signal. Today it runs Titan's inspections and saves more than 70 hours a month in Joe's own shop.
Then other contractors asked for it. CodeGreen ITM is now its own company, sold to fire and life safety contractors across the United States, and support still goes straight to Joe and Sam.
Twenty-one programs
Every system you look after, in one app.
Switch on only the services you sell and add more as you grow. Put several on one visit and the customer gets one combined report.
Fire and life safety
- Fire alarm (NFPA 72)
- Emergency lighting (NFPA 101)
- Fire extinguishers (NFPA 10)
- Call for aid (IFC)
- Kitchen hood suppression (NFPA 96, NFPA 17A)
- Hood exhaust cleaning (NFPA 96)
- Fire doors (NFPA 80)
- Auxiliary systems (panic, flood, freeze)
Water-based systems NFPA 25
- Sprinkler (wet, dry, preaction, deluge)
- Standpipe
- Fire pumps, with the pump curve
- Private fire service mains
- Water storage tanks
- Water spray
- Foam-water
- Water mist
Low voltage and security New
- Intrusion alarm
- Video surveillance
- Camera cleaning
- Access control
- Intercom
For the technician and the office
Built around how inspections actually run.
Close it out in the basement
Inspect, write deficiencies and finish the report with no signal.
Import from a panel point report
Bring in devices from a point report, spreadsheet, PDF or photo. Nothing saves until you check it.
Fire pump curves that plot themselves
Enter the readings and the curve is plotted against the 95% line on the report.
Deficiencies from found to closed out
Before and after photos, open items tracked in the office, hand-off to a subcontractor when needed.
Dispatch and qualifications
A dispatch board by day, week and month, with each technician's qualifications per service.
Read it before you buy anything
Real reports, not a sales demo.
The sample reports on codegreenitm.com are real CodeGreen ITM output: fire alarm, fire pump, sprinkler, kitchen hood, fire door and a combined visit. Your logo and license number go on every one.
Pricing
Priced on the page. Priced around the small shop.
Up to 6 technicians
$125 a month
Includes your first technician, plus $25 a month for each additional technician.
7 or more technicians
$95 per technician
A flat rate per technician, per month.
- Every inspection program included
- No implementation fee
- No card to start
- Cancel any time
For fire alarm designers
Fire alarm design, done right inside AutoCAD.
Clean, lightweight, AutoCAD-native tools that run on the commands you already know. Simple to use, and built to save designers time.
Sign on to the CodeGreen ITM inspection platform and get CodeGreen CAD Tools free of charge.
- Detector spacing and SLC wiring. Lay out detectors to NFPA 72 spacing, then wire the loop back to the FACU.
- Risers and sheets. Risers built from your layout, with sheets and viewports set up for you.
- Matrix and calcs. The fire alarm matrix, plus battery and circuit calculations.
- Automated templates. Start every job the same way, with your layers, blocks and title blocks.
- Sheet index and numbering. No sheet sets needed. The index keeps itself in order.
- Keynotes. Clean keynotes without AutoCAD Architecture.
Questions About CodeGreen ITM
What is CodeGreen ITM?
CodeGreen ITM is inspection, testing and maintenance software for fire and life safety contractors. Technicians run inspections on iPhone, iPad or Android, and the office handles dispatch, deficiencies and reports in any browser. It was written by Joseph Montuori, the NICET Level IV fire alarm contractor who runs Titan Fire Protection.
How is CodeGreen ITM related to Titan Fire Protection?
CodeGreen ITM started inside Titan. Joe wrote it around the way Titan's own inspections actually run, and Titan uses it every day. CodeGreen ITM is its own company, and the software is sold to contractors across the United States.
Which inspections does it cover?
Twenty-one programs: fire alarm, emergency lighting, extinguishers, call for aid, kitchen hood suppression and cleaning, fire doors, auxiliary systems, the NFPA 25 water-based systems (sprinkler, standpipe, fire pumps, private mains, tanks, water spray, foam-water and water mist), and five low voltage and security programs.
How does pricing work?
Up to six technicians, it is $125 a month including your first technician, plus $25 a month for each additional technician. At seven or more technicians it is a flat $95 per technician per month. Every program is included, with no implementation fee and no card to start.
Can I try it before I buy?
Yes. Every new account gets a 60-day free evaluation with no credit card. You can also read real sample reports on codegreenitm.com before you sign up.
Is this only for Connecticut contractors?
No. Titan's fire alarm service is Connecticut only, but CodeGreen ITM and CodeGreen CAD Tools are available to contractors and designers anywhere in the United States.
See it on your own jobs.
Sign up in the morning, inspect in the afternoon. 60-day free evaluation, no credit card.
Built by a NICET Level IV fire alarm technician and a software developer. We speak your language.
Looking for fire alarm service in Connecticut instead? Titan handles testing and inspections, service and repair and fire alarm drawings. Call 860-322-9028.