Import devices from a panel point report
Bring in the device list from a point report, spreadsheet, Word or PDF file, or a photo. Nothing saves until you check it.
NFPA 72 fire alarm inspection software
Fire alarm inspection software, written by a fire alarm contractor.
Joe Montuori built CodeGreen ITM for Titan's own fire alarm inspections. It asks only what the building has, holds up in a basement with no signal, and the report is done before you're back in the truck.
60-day free evaluation, no credit card. iPhone, iPad and Android, plus an office app in any browser.
What the fire alarm program does
Built around how a fire alarm inspection actually runs.
Only asks what the building has
Questions follow the system you set up. No pages of N/A to scroll past on every visit.
NFPA 72 Record of Completion that fills itself in
The record pulls from the system you already built, asks only for what is missing, and is signed on the phone or on paper.
Close it out in the basement
Inspect, record deficiencies and finish the report with no signal. It syncs when you are back in range.
Deficiencies from found to closed out
Before and after photos on every deficiency, open items tracked in the office, and hand-off to a subcontractor when someone else resolves it.
One visit, one combined report
Put several services on one visit and the customer gets one report. Review a whole account on one page and send it as one package.
Batteries tracked one by one
Hundreds of fire alarm batteries and control panels from the major manufacturers are already in the library.
Split a big job by area
Each technician signs their own areas and the lead submits once.
Dispatch and qualifications
A dispatch board by day, week and month, with each technician’s qualifications per service.
Your name on the report
Your logo and license number on every report, in the format your fire marshal expects.
Set up the system once
Import the device list from a panel point report.
Bring in initiating devices, modules and notification appliances from a point report, spreadsheet, PDF or photo. Check it, save it, and every inspection after that starts from the real system.
Deficiencies
From found to closed out, with before and after photos.
Every deficiency carries its device, location and photos. The office tracks what is open, hands an item to a subcontractor when someone else resolves it, and closes it out with an after photo.
The report
Done before you are back in the truck.
Your logo and license number on every report. Several services on one visit become one combined report, and a whole account can be reviewed on one page and sent as one package.
The office
Dispatch with qualifications built in.
Schedule by day, week or month and see which technicians are qualified for each service. Batch-schedule a run of inspections at once.
The Record of Completion fills itself in.
The NFPA 72 Record of Completion pulls from the system you already built in the app. It asks only for what is missing and is signed on the phone or on paper. See how the Record of Completion works →
More than fire alarm.
Fire alarm is one of 21 inspection programs: sprinkler and the other NFPA 25 systems, emergency lighting, extinguishers, call for aid, kitchen hoods, fire doors, auxiliary systems and five low voltage and security programs. See all 21 programs →
Pricing
On the page, with no seat minimum.
Up to 6 technicians
$125 a month
Includes your first technician, plus $25 a month for each additional technician.
7 or more technicians
$95 per technician
A flat rate per technician, per month.
- Every inspection program included
- No implementation fee
- No card to start
- Cancel any time
Fire Alarm Inspection Software Questions
What does fire alarm inspection software need to do?
Hold the system the way it is actually built (panel, power supplies, batteries, initiating devices and notification appliances), ask only the questions that apply, record deficiencies with photos, and produce a report the owner and fire marshal can read. CodeGreen ITM does all of that, and the NFPA 72 Record of Completion fills itself in from the same system data.
Can I bring in an existing system without typing every device?
Yes. Import devices from a panel point report, a spreadsheet, a Word or PDF file, or a photo. Nothing saves until you check it.
Does it work without a signal?
Yes. Technicians can inspect, write deficiencies and close out the report in a basement with no signal. It syncs when they are back in range.
Is it only for fire alarm?
No. Fire alarm is one of 21 programs, including sprinkler and the other NFPA 25 systems, emergency lighting, extinguishers, kitchen hoods, fire doors and security. Put several on one visit and the customer gets one combined report.
How does pricing work?
Every account starts with a 60-day free evaluation with no credit card. After that, pricing is $125 a month for up to six technicians (first technician included, $25 for each additional), or a flat $95 per technician at seven or more.
Run your next fire alarm inspection on it.
Sign up in the morning, inspect in the afternoon. 60-day free evaluation, no credit card.
Built by a NICET Level IV fire alarm technician and a software developer. We speak your language.